4 Easy Tips On How To Perfectly Clean Your AC System

Air conditioning unit plays a major role in all premises to provide a cool and relaxing environment. It is necessary to take care of this cooling system to avoid malfunctions and breakage which can cost in higher amounts. AC Cleaning should be performed on a regular basis to avoid overheating problems, freezing coils, and to ensure the system is functioning appropriately without any leaks or wiring issues. Although some of this work needs help from professional services, regular cleaning can be performed by you with some time and precision. Here are 4 easy tips on how to perfectly clean your AC unit for your reference.

Start From The Indoor Units

Before starting off with the cleaning procedure, turn off the power to the AC unit at your breaker for safety paramount. Open up the AC unit by removing the foil duct tape or the blots and screws available in the door of the blower unit depending on the type of your cooling machine. Once you reach the inside blower unit, clean the evaporator coils by using a soft brush to remove dust and debris.

The evaporator coil usually consists of the particles populating inside your premises including minute dust, pollen, skin cells, etc. Make sure to wear a mask before cleaning to avoid getting infected, especially if you are prone to allergic conditions. You also can utilize a no-rinse coil cleaner spray that is usually available in the local stores to complete this step.

Following the coil, you can clean the drain pan with soap, hot water, and some bleach. Mix the bleach and water in a 1:1 ratio and pour the solution down the drain. Bleach will aid in thorough sanitization removing all the germs, turning your drain into a pathogen-free environment.

Clean The Outside Components

Once you have finished reattaching the access panel of the inside units you can reach the outside components which usually requires more labor dealing with the constant exposure to dirt on the outside. Remove the AC grille by taking out the sheet metal screws on top of the unit, clean the debris and leave in the bottom pan after lifting the fan unit and grille.

Clean the AC coils and fins using a coil cleaning solution by mixing or diluting it according to the directions provided in the bottle. Spray it onto the coils and wash it off with your water hose after a few minutes. Do not forget to wash the valve that connects the evaporator drain to the unit.

The fins of the AC unit tend to bent with the heat outside and reduce airflow and the efficiency of your cooling unit. A fin tool can help you to fix this problem with its teeth like a comb that can carefully bring the fins back to their original state.

To ensure optimal airflow make sure the area around the unit is completely clear in every direction and if you find the condenser is not level get it where it needs to be. Once all the checks are completed replace the fan cage and fix it back to the unit.          

Deep Clean The Air Filters

Carefully remove your air filters from your AC unit before the cleaning process. Do not attach the brush and instead run the vacuum nozzle on the length of the filter. Do not push too hard as it can make dents or damage the filter.

Fill a large container with water that fits into the size of your air filter and add a small amount of liquid detergent that you take for regular use and mix well with water. Soak the AC filter in the water and move back and forth covering the soapy solution and let it sit for 10-15 minutes and rinse it off.

Sanitize your AC filter using a solution of vinegar and water and leave it for 10 minutes and rinse it with running water. Let your filter to air dry completely before fixing it back to the unit.

Check The Drain Line And Wiring

Without regular maintenance, the drain can get clogged with the accumulation of mold and algae. Follow your drain to find the endpoint and take the vacuum hose and hold it to the end of the drain tube. Let it run for a few minutes to clear out any buildup inside your drain.

Check out the wiring and components of your unit to ensure they are tight and in good condition. You can look for melted or blackened wires which is usually a sign of overheating of your unit.  If you find any problems in the wiring system do not touch them by yourself to avoid danger and get help from NADCA professionals to solve the matter.

Follow these steps for a complete clean of your AC unit and get yourself benefited from an efficient air conditioning unit, saving your money, energy, and time. Retention is crucial to avoid malfunctions and for the prolonged usage of your investment.  If you notice any problems like leaks, wiring issues or anything that you cannot fix by yourself do not hesitate to contact the best AC maintenance service company, Adams Care, a NADCA certified company with the best professionals in Dubai to resolve your cooling problems.